Precision Series / Energy Series Treadmill Owner's Manual: TRM 425 / 223 14
As you press the correct keys, a line of asterisks
appears on the console. Once you have entered the
entire safety code, you can begin your workout (or
change the settings on your treadmill). If a key is not
pressed within five seconds or the correct safety code
is not entered within two minutes, the message
INVALID CODE, TRY AGAIN appears on the console
and the running belt does not move. After two
minutes, the Precor banner reappears.
Important: Do not assume the treadmill is safe because of
safety code protection. Never leave children unsupervised
around the treadmill. Always turn off and unplug the
treadmill when it is not in use.
Using the Handrails
To maintain your balance, always grasp a handrail
extension when you step on or off the treadmill, and
when you use the keypad.
To learn more about the touch-sensitive grips, refer to
Measuring Your Heart Rate.
To Next Page
Loading...
