MAX-PRO Operator Manual
Original Printed in English
The Sharp MAX-PRO is designed to use a wide varie-
ty of bag sized and materials. Sharp EZ-Bags
©
are
recommended for optimum operating performance,
efficiency and safety. System performance specifica-
tions are base on utilizing consistent, high quality, pre-
opened bags. Any bag used must meet Sharp Pack-
aging Systems’ manufacturing tolerances. The follow-
ing list shows so me of the Sharp EZ-Bags
©
films
available through Sharp Packaging Systems, Inc.:
E-Z Bags©
• General Purpose
• Xtreme Poly (XP)
• Ultra
• HD Mailer
• Sharp Packaging High Density (SPHD)
• Polypropylene
• Sharp’s Military Specification Film
• Gamma Patient
• Sharp’s Metalized Barrier Film
• Electric Static Discharge (ESD)
• Modified Atmospheric Packaging (MAP)
• Sharp’s Non-Scratch Film
• E-Z Stat™ (Anti-Static)
• Vapor Corrosive Inhibitor (VCI)
Contact Sharp Customer Service at +1 (262) 246-
8815 to order Sharp EZ-Bags© and for information
regarding film and bag specifications.
THERMAL TRANSFER RIBBON
The Sharp MAX-PRO uses thermal transfer ribbon to
print various information onto the bags as they pass
through the machine. The following is a list of ribbon
that is available through Sharp Packaging Systems.:
• Standard Direct Wax Ribbon
• Premium Was Resin Ribbon.
Contact Sharp Customer Service at +1 (262) 246-
8815 to order ribbon.
SHARP EZ-BAGS
©
& RIBBON
1-9
SECTION 1 - INTRODUCTION
To Next Page
Loading...
