Pregis SHARP MAX-PRO - Package Eject; Load Plate

MAX-PRO Operator Manual Original Printed in English
JOB SETUP SCREEN - PACKAGE EJECT
Any changes made to this screen requires operator to press ‘Load Job’ button.
BAG
Bag Drop Time: Time for bag to drop before feeding new bag out.
LOW-PRESSURE AIR
LPA Bag Eject Assist: Toggle switch turns LPA ON or OFF to assist the ejection of sealed bag.
EXTERNAL EXIT CONVEYOR
Runtime: Timeout for External Exit Conveyor, starts when package starts to fall.
INDEPENDENT BAG DEFLATOR
Package Eject Delay: Delays the start of Package Eject from normal firing time of the cycle.
Package Eject Dwell: Timeout for Package Eject in discharge position.
INTEGRATED EXIT CONVEYOR
Runtime: Timeout for Integrated Exit Conveyor, starts when package starts to fall.
LOAD PLATE
Load Plate Dwell: Timeout for load plate in discharge position.
Load Plate Delay: Starts when bag starts to fall.
SCREEN NAVIGATION
SECTION 2 - CONTROLS
2-8