MAX-PRO Operator Manual
Original Printed in English
PACKAGING SPECIFICATIONS
MACHINE SPECIFICATIONS
1
Material, gauge and size of package, along with weight and
size of product will cause rate to vary.
TECHNICAL ASSISTANCE
Assistance with your Sharp MAX-PRO can be ob-
tained by contacting Sharp Packaging Systems Tech-
nical Service Hotline by phone or e-mail. To help
serve you better, Sharp Packaging requests that you
provide the serial number of bagger and a brief de-
scription of the problem.
Phone: +1 (262) 246-8815 (ext. 1572)
E-mail: sharpservice@pregis.com
SERIAL IDENIFCATION DECAL
The serial number of the can be found on the Serial
Identification Decal located on the rear of the bagger
or inside of Electrical Box.
In the above example:
MAX-PRO 24 - Type of Sharp Bagger.
21B - The year and month bagger was built.
1182-02 - Model Number of bagger.
XXXX - The number of bagger.
SPECIFICATIONS
1-5
BAG WIDTH BAG LENGTH FILM GAUGE
MINIMUM 10” (25.4 cm) 10” (25.4 cm) 1 mil (25 microns)
MAXIMUM 24” (60.96 cm) 36” (91.44 cm) 4 mil (100 microns)
WIDTH HEIGHT DEPTH WEIGHT POWER
OPERATING
TEMP
HUMIDITY
RANGE
42.0”
(106.68 cm)
41.52-48.02”
(105.45-
121.97 cm)
85.71”
(217.7 cm)
955 lbs.^
(433.18 kg)
120VAC,
15A
32° - 140° F
10% - 90%RH,
Non-
Condensing
SECTION 1 - INTRODUCTION
To Next Page
Loading...
