MAX-PRO Operator Manual
Original Printed in English
Any changes made to this screen requires operator to press ‘Load Job’ or ‘Save & Load’ button.
OUTPUT 2
Not Configured: No configuration.
Printer Data Ready: Output active when Printer is ready for a new label.
Waiting For Printer: Machine is cycling and film is backed up and ready to print but printer needs label.
Cycle Complete: Cycle done.
Bag Made: Bag is dropping.
Bag Made + Label Required: Bag is dropping AND printer needs a label.
Bags Low: Bags low sensor is active.
SCREEN NAVIGATION
SECTION 2 - CONTROLS
2-11
To Next Page
Loading...
