Premium V12 - Reviewing Blood Glucose Day Average Results

27
Reviewing Blood Glucose Day Average Results
1. Press and release M Button.
When “ ”appearsonthedisplay,
keep pressing M for 3 seconds until the
flashing “ ”appears.Release
M and then your 7-day average result
measured in general mode will appear on
the display.
2. Press M to review 14-, 21-, 28-, 60- and 90- day average results stored
in memory.
3. Exit the meter memory. Press M after the 90-day average is displayed
and the meter will turn off.
NOTE:
•Anytimeyouwishtoexitthememory,holdpress M down for 5 seconds or
leave the meter idle for 3 minutes. The meter will turn off automatically.
•ControlsolutionresultsareNOT included in the day average.
•Iftherearenorecordsinmemory,“---”displayswhenyourecallthetestresults
or review the average result.