Premium V12 - Setting the Meter

11
1. Setting the date
With the year flashing, press M Button
until the correct year appears. Press SET
Button.
With the month flashing, press M Button
until the correct month appears. Press
SET Button.
With the day flashing, press M Button
until the correct day appears. Press SET
Button.
2. Setting the time
With the hour flashing, press M Button
until the correct hour appears. Press SET
Button.
With the minute flashing, press M Button
until the correct minute appears. Press
SET Button.
Setting the Meter
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
Entering the Setting Mode
Startwiththemeteroff(noteststrip
inserted).Press SET.