29
MAINTENANCE
Battery
Your meter comes with two 1.5V AAA size alkaline batteries.
Low Battery Signal
The meter will display the message below to alert you when the meter
power is getting low.
The symbol appears with E-b, Error and low:
The power is not enough to do a test. Please change the
batteries immediately.
Replacing the Battery
To replace the batteries, make sure that the meter is turned off.
1. Remove the battery cover.
2. Remove the old batteries and replace with two 1.5V AAA size alkaline
batteries.
3. Align the positive and negative terminals of the batteries with
thepositive(+)andnegative(-)signsengravedinsidethebattery
compartment.
4. If the batteries are inserted correctly, you will hear a "beep" afterwards.
Then close the battery cover.
To Next Page
Loading...