4
1. Activate Button.Tocompletely remove any channel from
a
Cue Mix, simply deactivate the Cue Mix object for that
channel. In most instances, you will leave this enabled.
2.
HorizontalLevelFader.
This is the channel’s Cue Mix volumecontrol.By
default this level will be identical to the level set on the channel’sfader.Once
you move the Cue Mix level fader,the volume of that channel in the Cue Mix
will be independent of the main mix or any other cue mix in the session.
3.
PanControl.
This setsthepan position forthe channel in the CueMix
outputs. Like volume,panning is identical to the main mix by default.
4.
LocktoChannelbutton.By default, the Lock to Channel button is enabled,
and
level and pan values are locked to the Channel level and pan controls for the
Main mix. This means that each Cue Mix will be identical to the Main mix in
the Console. Changing the level or panning in the Main mix will change the
level or panning in the Cue Mix. However, changing the level or panning in
the Cue Mix object will unlock both settings, allowing independent control
of level and panning for each channel in each Cue Mix. Thus, the level and
panning forchannels in a Cue Mix can be completely differentfrom the related
level and pan in the Main mix. At any time,you can lock the Cue Mix level and
pan back to the channel settings by clicking on the Lock to Channel button.
1. Activate Button.
要从
Cue Mix
中完全删除任何通道，只需停用该通道的
Cue Mix
对象。在大多数情况下，你会让它处于启用状态。
2.
Horizontal Level Fader.
这是该通道的
Cue Mix
提示混合音量控制。默认
情况下， 这个电平将与该通道上音量推子设置的电平相同。一旦你移动
Cue Mix
电平推子，
Cue Mix
中该通道的音量，将独立于主混音或会话中的
任何其他监听混音。
3.
Pan Control.
一旦你移动
Cue Mix
电平推子，在
Cue Mix
中的该通道音量将
独立于主混音或会话中的任何其他提示混音。
4.
Lock to Channel button.
默认情况下，
”
Lock to Channel
”
按钮被启用，电平
和
pan
值被锁定到主混音的通道电平和
pan
控制上。这意味着，每个提示混
音将与控制台中的主混音相同。改变主混音的电平或平移，将改变监听混
音的电平或平移。然而，改变监听混音对象的电平或平移，将解锁两个设
置，允许独立控制每个通道的电平和平移。独立控制每个监听混音中每个
通道的电平和平移。因此，监听混音中的通道的电平和平移，可以与主混
音中的相关电平和平移完全不同。你任何时候都可以通过点击
”
Lock to Channel
”
按钮，将监听混音的电平和
pan
锁定到通道设置上。
To Next Page
Loading...
