Pressure Systems 9022 - Page 87

Pressure Systems, Inc. NetScanner™ System (9016, 9021, & 9022) User’s Manual
www.PressureSystems.com
3 - 57
11
Thermal Update Scan Interval (in seconds) as decimal (**) integer value.
1B
12
9022 Front-end Calibration Interval
22
3C
(9016 only) Temperature Ranges, as a hex value
0000 = range 0 to 60ºC
0006 = range -30 to 60ºC
0007 = range -20 to 70ºC
(+) NOTE: This 4-byte hex status fields may also be returned in autonomous data streams, but
as pure binary extensions of each stream’s packet binary header (see ‘c’ command,
ii=05, bbbb=0002).
Examples:
! Request model number from any NetScanner
™
System (9016) module:
“q00”
Read response indicating it is a model 9016:
“9016”
! Request TCP back-off delay for any NetScanner
™
System module:
“Q07"
Read hex (16-bit binary) response:
“001F” (31 decimal, or 31 x 20=620 µsec.)