10800036: Address of the interface “0”
initial
Description
Temperature set point for domestic hot water
(adjustable from 60 to 80°C).
00: Domestic hot water “OFF”
01: Domestic hot water “ON”
00: Heating mode “OFF”
01: Heating mode “ON”
Temperature set point for the water in the heating circuit
(adjustable from 30 to 90°C).
Minimum temperature for the water in the heating circuit
(adjustable from 15 to 60°C).
Increase of the primary temperature set point to generate hot water
12: if there is a tank with an NTC sensor
13: if there is a tank with a thermostat
INSTALLATIoN
Parameter 6 = 23
Parameter 7 = 1: parallel
Parameter 7 = 2: hot water priority
Parameter 7 = 3 : restricted hot water priority
To Next Page
Loading...
