Need help?Do you have a question about the Prestige 75 and is the answer not in the manual?
Provides crucial advice and precautions for installation and usage safety.
Outlines emergency procedures in case of gas leakage detection.
Guides users on adjusting key operational parameters for heating and hot water.
Explains how the system indicates faults and the procedure for resetting it.
Illustrates the electrical connections for the Prestige Solo 50-75 models.
Illustrates the electrical connections for the Prestige Solo 120 models.
Provides detailed physical dimensions for the Prestige Solo 50-75 and 120 models.
Covers requirements and options for flue gas exhaust and air intake systems.
Guidelines for connecting the boiler to the central heating system.
Details the first configuration for heating and optional hot water tank, including block diagram and equipment.
Describes the second configuration using a Room Unit for heating and hot water, including block diagram and equipment.
Explains the third configuration for controlling two heating circuits with AM3-11 module, including block diagram and equipment.
Details the fourth configuration for two heating circuits with Room Unit and ZMC-1 module, including block diagram and equipment.
Step-by-step guide for initial system setup and checks after installation.
Guide to accessing and modifying various operational parameters via the MCBA.
Comprehensive list of error codes and their corresponding remedies for troubleshooting.
General| Fuel Type | Natural Gas |
|---|---|
| Boiler Type | Condensing |
| Efficiency | 95% |
| Heating Capacity | 75, 000 BTU/hr |
| Operating Pressure | 30 psi |
| Weight | 120 lbs |
To Next Page
