EN • 33
ENGLISHFRANCAISNEDERLANDSESpAñoLITALIANoDEuTSCH
664Y2300.C
mCBA pARAmETERS FoR THE SpECIALIST
Factory setting
Key Screen Description of parameters Solo Excellence
STEP
First position:
Domestic hot water pump [1] or
three-way mixer tap [2]
Second position:
tank with NTC3 probe [2] or
tank with thermostat (3)
STEP
Manual fan number of revolutions
STEP
First position:
Fan control pump level during burning in
Second position:
Fan control pump level during over-run
time
STEP
Hold temperature
STEP
Maximum temperature for the start heating
curve for the 2nd circuit
STEP
Minimum temperature for the start heating
curve for the 2nd circuit
STEP
2nd circuit temperature hysteresis
STEP
First position:
Special pump
[0 = disabled]
Second position:
Minimum disable cycle
[0 = disabled]
To Next Page
Loading...
