4. Getting started
Use internal PC
1� Use the power cord to connect the MultiBoard to a power socket�
2� Switch on the POWER button on the back of the MultiBoard�
3� Turn the MultiBoard on by using the remote control or the power button on the touch
panel on the front of the MultiBoard�
4� Use the INPUT button on the remote control or the touch panel to display the input
source list�
5� Press / to select the PC as the input source�
6� Press ENTER to confirm your selection�
4
PMB554H847,707,657_QSG_ EN_no TV.indd 16 2013/10/15 14:29:04
To Next Page
Loading...
