Prevue Hendryx 485 - Feisty Ferret Home Assembly Guide; Panel Identification Tips; Step 1: Base Frame and Legs

Orient the front legs (F1)
with the windbell lock
facing forward.
The extended portion of
the tray channel rail (L1)
also faces forward.
Attach together with a hex
screw through the bracket
bottom hole.
Orient the back legs (B1)
with the tray channel
backstop facing the back.
Attach legs to sides with
hex screws in the bracket
bottom holes.
Attach the shelf (CS) with
hex screws through the holes
at the base of the legs.
HOW TO TELL THE DIFFERENCE : S
everal parts and panels may look similar. Here’s how to tell the difference:
Feisty Ferret Home
ASSEMBLY
Instructions online at www.prevuepet.com
485(B)—11/19 — A4.2 For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals, visit www.prevuepet.com
NO ADDITIONAL TOOLS REQUIRED • For best results, follow the Assembly Steps in the order presented.
CUSTOMER SUPPORT
Please contact Prevue Pet Products:
PHONE
1 (312) 243-3624
ONLINE
www.prevuepet.com
EMAIL
customerservice@prevuepet.com
× 8
FRONT & BACK PANELS :
TOP vs BOTTOM
The bottom panels (F2 & B2)
have brackets on the corners.
Top panels (F3 & B3) do not.
KEY:
L = Left Side
B = Back
F = Front
R = Right Side
CR = Center / Roof
CM = Center / Mid-
Level Floor
CG = Center /
Ground Floor
CT = Center / Tray
CS = Center /
Shelf
1
PIECES
]L
1
]R
1
]F
1
]Cs
]B
1
interchangeable
485
MODEL #
B
Cr
Cm
Cg
Cs
CENTER PANELS
The roof panel (CR) has an attached
wire access door, and a center hole
on the frame on both sides.
The midlevel floor panel (CM) has
a detachable wire divider door, and
a center hole on the frame on both
sides.
The ground floor panel (CG) has
NO door and NO center hole on the
sides.
The shelf (CS) is longer, and has
threaded screw holes on the front
and back corners of the frame.