Creating Discs 29
B.6 PTProtect (PC Disc Publishers Only - Requires separate
purchase of USB dongle)
PTProtect allows you copy-protect any DVD Video and mass
produce protected discs using the PTPublisher software and a
Primera Disc Publisher.
You can protect an existing Master DVD by first converting it
to an ISO image using PTPublisher or you can protect a DVD
that is stored on your hard drive as VIDEO_TS and AUDIO_TS
folders. Instructions for each of the two methods are found in
the instructions with the PTProtect dongle or in the
PTPublisher software help file.
To protect DVDs you must first insert the PTProtect USB
Dongle (100, 250, 500, 1000 or 5000 protections) into a USB port
on the same computer that the Disc Publisher is connected to.
Once you insert the dongle it will appear in My Computer as
the next available drive letter with a Volume Label as
“PTProtect.”
When PTPublisher is launched the PTProtect option will be
enabled. The number of protections enabled will be visible on
the Summary screen (Step 3) of the DVD Video Project or
Image Project.
Note:
You will receive 3 free protections before the dongle is connected.
After the free protections are used the PTProtect option is still visible
but not selectable.
To Next Page
Loading...
General
