2 Getting Started
These instructions are written to apply to all models. For exam-
ple there are no special instructions for burning Blu-ray discs if
you have a Blu-ray model. The software simply recognizes that
you have Blu-ray capable drives and adds the BDR media type
to the list of available media to burn.
B. CHOOSING A GOOD LOCATION
• Place the Publisher in a location with adequate air
circulation to prevent internal heat build up. You will
need at least 15.25" (38.73 cm) of over-head space to fully
open the cover.
• Do not place the Publisher near heat sources such as
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
C. UNPACKING AND INSPECTION
While unpacking your Publisher, inspect the carton to ensure
that no damage has occurred during shipping. Make sure that
all supplied accessories are included with your unit.
The following items should be included:
• Disc Publisher
• Power Cord and Converter
• One Three-Color (CMY) Ink Cartridge
• Installation Disc
• USB 2.0 Interface
Cable (Beige)
• Quick Start
Guide and Other
Printed
Information.
Save the carton and
packing materials.
They will come in
handy later if you
ever need to
transport the
Publisher and/or
any of its parts and
accessories.
To Next Page
Loading...
General
