Primes PMT 01 - Default Chapter; Table of Contents

35,0(6
PocketMonitorPMT
4
Revision 01/2020 EN
Table of contents
1 Basic safety instructions 8
2 Symbol explanation 10
3 About this operating manual 11
4 Conditions at the installation site 11
5 Important information for devices with lithium-ion battery 12
5.1 Storing the battery ............................................................................... 12
5.2 Replacing the battery ........................................................................... 12
5.3 If the battery is damaged ..................................................................... 12
5.4 Disposing of the battery ....................................................................... 12
6 Introduction 13
6.1 System description .............................................................................. 13
6.2 Measuring principles ............................................................................ 14
6.3 Differentiation of device types by means of identification plates ............ 14
7 Transportation 15
8 Connect the PocketMonitor PMT by cable 16
8.1 Connect device types sep or sep/out with suitable cable and operating
unit ...................................................................................................... 16
8.2 Connect device types sep/out with the cable of the analog current loop
interface ............................................................................................... 17
9 Installation/Removal 18
9.1 Prepare installation ............................................................................... 18
9.2 Mounting position ................................................................................ 18
9.3 Align the device ................................................................................... 19
9.4 Position the device in the laser system ................................................. 20
9.5 Remove the device from the laser system ............................................ 20