9 Measuring
WARNING
Danger of injuries due to scattered radiation
The PocketMonitor must not be held into the beam path by hand!
Put the PMT onto a thermally isolating, temperature-resistant surface
that simultaneously xates the device.
Wear safety goggles that are adapted to the laser wavelength used.
NOTICE
Danger of damage
The maximum admissible laser power of a PocketMonitor is measured
with an irradiation time of 10 s. After 20s the absorber would overheat.
Please mind the limit values in table Tab. 9.1.
PMT-Type Irradiation Time
10 s 20 s
002p 20 10
01p 100 50
05p 500 250
30p 3,000 1,500
70icu 7,000 3,500
120icu 12,000 6,000
Maximum Admissible Laser Power in W
Tab. 9.1: Maximum laser power depending on the irradiation time.
To Next Page
Loading...
Need help?
General
