What to do if my Primus RF6 Scrubber displays 'Unload' and 'Door is Open'?
If your Primus Scrubber displays 'Unload' and indicates that the 'Door is Open', check if the “Door Switch” is still closed. If the “Door Switch” is broken, replace it.
How can I fix a 'Heating Time Failure' on my Primus RF6?
If you're getting a 'Heating Time Failure' (Failure 14) on your Primus Scrubber, check if the programmed Max Heating time in the Initialisation menu is acceptable. If the machine has a small heating capacity, increase the value of the Max heating time.
How to resolve a 'Wrong Inverter Model Type' error on a Primus RF6 Scrubber?
If your Primus Scrubber displays a 'Wrong Inverter Model Type' (Failure 44) error, verify that you have selected the correct machine type in the Configuration menu.
How do I clear the 'Service Due Warning' on my Primus Scrubber?
If you're seeing a 'Service Due Warning' (Failure 41) on your Primus Scrubber, you can reset the cycle counter in the Service Menu. To check the cycle counter, press the SERVICE-STATE button and find the value in the second menu item.
General safety instructions and precautions for operating the machine.
Step-by-step guide on how to create a new wash program.
Details on programming wash speed, extraction speed, supplies, and time limits.
Steps to access and navigate the machine's initialization menu.
Procedure to access and configure machine-specific settings in the configuration menu.
Instructions for accessing the program menu to manage wash programs.
Functions for selecting program number, naming, viewing, editing, copying, and deleting programs.
Functions for adding, editing, inserting, viewing, deleting, and exiting program steps.
Detailed explanation of programming wash sequences, including selecting wash parts.
Steps to select and start a wash program using the program number.
Understanding and interpreting machine failure messages displayed on the screen.
Explanation of diagnostic error messages and how they are displayed.
Procedures for interpreting and resolving common machine fault messages and safety conditions.
A comprehensive list of failure messages, their causes, actions, and occurrences.
Step-by-step guide for safely replacing the electronic board and keypad.
Procedure for updating the machine's software, including EPROM replacement and configuration.
To Next Page
General