15. Fuel Tank Cap:
Open this cap for filling the fuel. Close the tank for starting and operation.
16. Decompression Valve:
Press down on this valve to make starting easier. When air pressure in the engine
reaches a preset value, it automatically closes.
17. Water Attachment:
Feeds water to both sides of diamond blade. Connect to water supply for wet cutting.
18. Tensioning Nut:
For V-belt tension adjustment. Turn this nut clockwise to loosen the V-belt, turn the nut
counter clockwise to tension the V-belt
19. Muffler:
Reduces both noise and emissions.
20. Blade Guard Adjusting Lever :
Allows adjustment of blade guard to direct dust away from operator.
9
To Next Page
Loading...