8. Full throttle lock button:
Locks the throttle in full open position by pressing this button while the trigger is fully
depressed. Pressing and releasing the trigger returns the throttle to idle position.
9. Throttle trigger:
Controls engine speed by manipulating the throttle. Pulling the trigger backward opens
the throttle and the engine accelerates. Releasing the trigger slows down the engine.
10. Rear Handle:
Used to securely hold the saw while under operation.
11. Filter Cover Lock lever:
Locks the air filter cover. Pull back on the lever to open the filter cover.
12. Air Filter:
Filters dirt and debris from entering carburetor.
13. Choke Lever:
Turning this lever counter clockwise closes the carburetor. Used to prime engine
(cold starting). Turn clockwise for normal operation.
14. Starter Grip:
Pull to start engine.
8
To Next Page
Loading...