Need help?Do you have a question about the Printrbot Simple and is the answer not in the manual?
General| Filament Diameter | 1.75mm |
|---|---|
| Nozzle Diameter | 0.4mm |
| Connectivity | USB |
| Build Volume | 150 x 150 x 150 mm |
| Print Speed | Up to 80mm/s |
| Software | Cura, Repetier-Host |
| Frame Material | Laser-cut wood |
| Weight | 5 kg |
| Print Technology | Fused Deposition Modeling (FDM) |
To Next Page
