(7) When transfer is completed, the status displayed in the dialog box will change
from [Transferring] to [Complete Transfer]. Click [Close] to close the dialog box.
The display unit will be reset and a screen of the transferred project file will be
displayed.
(8) Close the Transfer Tool.
(9) Click the [X] mark on top right of the screen or [Project]->[Exit] to close GP-Pro
EX.
3.6 Differences of software
Some functions supported by GP/ST-3500 series are not supported by GP-4501T/TW.
For details of the supported parts and functions, refer to [Supported Featuers] of
GP-Pro EX Reference Manual
(http://www.pro-face.com/otasuke/files/manual/gpproex/new/refer/gpproex.htm
).
35/49
To Next Page
Loading...
