EasyManua.ls Logo

Pro-Form ENDURANCE S7 PETL79714.1 - User Manual

Pro-Form ENDURANCE S7 PETL79714.1
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER’S MANUAL
www.iconeurope.com
Model No. PETL79714.1
Serial No.
Write the serial number in the space
above for reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
CUSTOMER SERVICE
UNITED KINGDOM
Call: 0330 123 1045
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
Unit 1D, The Gateway
Fryers Way, Silkwood Park
OSSETT
WF5 9TJ
UNITED KINGDOM
AUSTRALIA
Call: 1800 993 770
E-mail: australiacc@iconfitness.com
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA

Table of Contents

Questions and Answers

  • D
    Dalton JenningsAug 2, 2025
    How to fix Pro-Form ENDURANCE S7 PETL79714.1 when the power does not turn on?
    • B
      browningjenniferAug 2, 2025
      If the power does not turn on, ensure the power cord is plugged into a properly earthed outlet. If you need an extension cord, use a 3-conductor, 14-gauge cord no longer than 5 ft. Also, make sure the key is inserted into the console. Finally, check the power switch on the treadmill frame; if it's tripped, wait five minutes and press it back in.
  • J
    Jeffrey JamesAug 8, 2025
    What to do if Pro-Form ENDURANCE S7 PETL79714.1 Treadmill power turns off during use?
    • D
      David CobbAug 8, 2025
      If the Pro-Form Treadmill power turns off during use, check the power switch and if it has tripped, wait five minutes, and then press the switch back in. Also, make sure the power cord is plugged in; if it is, unplug it, wait five minutes, and plug it back in. Another solution is to remove and reinsert the key from the console. If the treadmill still won’t run, please see the front cover of this manual.
  • J
    janet74Aug 16, 2025
    How to fix Pro-Form Treadmill walking belt that is off-center?
    • T
      trussoAug 17, 2025
      If the walking belt is off-center on your Pro-Form Treadmill, first remove the key and unplug the power cord. If the belt has shifted left, turn the right idler roller screw clockwise 1/2 turn. If it has shifted right, turn the left idler roller screw counterclockwise 1/2 turn.
  • J
    Jimmy HuberAug 25, 2025
    How to stop Pro-Form Treadmill walking belt from slipping?
    • K
      Kathy GoodwinAug 25, 2025
      If the walking belt slips when walked on your Pro-Form Treadmill, first remove the key and unplug the power cord. Then, using the hex key, turn both idler roller screws clockwise, 1/4 of a turn.

Summary

Important Precautions

Before You Begin

Assembly Instructions

Using the Treadmill

Plugging in the Power Cord

Console Features

Turning on the Power

Manual Mode Operation

Onboard Workout Guide

8-Week Weight-Loss Workout

Folding and Moving the Treadmill

Folding the Treadmill

Steps to safely fold the treadmill for storage, including incline adjustment.

Moving the Treadmill

Guidance on safely transporting the folded treadmill, highlighting precautions.

Lowering the Treadmill for Use

Instructions for unfolding the treadmill from its storage position to operational readiness.

Maintenance and Troubleshooting

Treadmill Maintenance

Troubleshooting Common Issues

Solutions for common problems like power failure, console errors, and operational faults.

Exercise Guidelines

Exercise Intensity Levels

Workout Guidelines

Suggested Stretches

Ordering Replacement Parts

Pro-Form ENDURANCE S7 PETL79714.1 Specifications

General IconGeneral
Display6" Backlit Display
Programs20 Workout Apps
Heart Rate MonitoringEKG Grip Pulse
iFit CompatibilityYes
Speed Range0 - 12 mph

Related product manuals