Pro-Form PFBE11520.0 - Page 10

10
9
10
31
31
16
16
5
6
30
2
11
26
10. Attach the Seat (11) to the Seat Frame (2)
with four M6 x 40mm Screws (30) and four M6
Washers (26); start all four Screws, and then
tighten them. To avoid damaging the Seat,
tighten the Screws only until the Seat does
not move or feel loose.
9. Attach the Backrest (6) to the Backrest Frame
(5) with two M8 x 45mm Screws (31) and two
M8 Washers (16). To avoid damaging the
Backrest, tighten the Screws only until the
Backrest does not move or feel loose.
30
26