13
HOW TO CONNECT YOUR TABLET TO THE
CONSOLE
The console supports Bluetooth connections to tablets
via the iFIT app and to compatible heart rate monitors.
Note: Other Bluetooth connections are not supported.
1. Download and install the iFIT app on your
tablet.
On your iOS
®
or Android™ tablet, open the App
Store℠ or the Google Play™ store, search for
the free iFIT app, and then install the app on your
tablet. Make sure that the Bluetooth option is
enabled on your tablet.
Then, open the iFIT app and follow the instructions
to set up an iFIT account and customize settings.
2. Connect a heart rate monitor to the console if
desired.
If you are connecting both a heart rate monitor and
your tablet to the console, you must connect your
heart rate monitor before you connect your
tablet. See HOW TO CONNECT A HEART RATE
MONITOR TO THE CONSOLE at the right.
3. Connect your tablet to the console.
Press the iFIT Sync button on the console; the
console pairing number will appear in the display.
Then, follow the instructions in the iFIT app to con-
nect your tablet to the console.
When a connection is established, the LED on the
console will turn solid blue.
4. Record and track your workout information.
Follow the instructions in the iFIT app to record and
track your workout information.
5. Disconnect your tablet from the console if
desired.
To disconnect your tablet from the console, first
select the disconnect option in the iFIT app. Then,
press and hold the iFIT Sync button on the console
until the LED on the console turns solid green.
Note: All Bluetooth connections between the con-
sole and other devices (including any tablets, heart
rate monitors, and so forth) will be disconnected.
HOW TO CONNECT A HEART RATE MONITOR TO
THE CONSOLE
The console is compatible with Bluetooth Smart heart
rate monitors. For information about purchasing an
optional chest heart rate monitor, see page 14.
To connect your Bluetooth Smart heart rate monitor to
the console, press the iFIT Sync button on the console;
the console pairing number will appear in the display.
When a connection is established, the LED on the
console will flash red twice.
Note: If there is more than one compatible heart rate
monitor near the console, the console will connect to
the heart rate monitor with the strongest signal.
To disconnect your heart rate monitor from the console,
press and hold the iFIT Sync button on the console
until the LED on the console turns solid green.
Note: All Bluetooth connections between the console
and other devices (including any tablets, heart rate
monitors, and so forth) will be disconnected.
To Next Page
Loading...
Need help?
General