22
MAINTENANCE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and properly
tighten all parts each time the elliptical is used.
Replace any worn parts immediately.
To clean the elliptical, use a damp cloth and a small
amount of mild soap. IMPORTANT: To avoid damage
to the console, keep liquids away from the console
and keep the console out of direct sunlight.
CONSOLE TROUBLESHOOTING
If the console does not turn on, make sure that the
power cord is fully plugged in.
If the console does not display your heart rate when
you hold the handgrip heart rate monitor, or if the dis-
played heart rate appears to be too high or too low, see
8 on page 16.
HOW TO CALIBRATE THE INCLINE SYSTEM
If the incline system is not functioning properly, it may
need to be calibrated. To calibrate the incline system,
press and hold the Manual Control button for several
seconds until the test mode appears in the display.
Next, press the Tempo Apps button. Then, press the
Incline increase or decrease button to calibrate the
incline system. The incline frame will move upward and
downward as it calibrates.
When the incline frame stops moving, the incline
system is calibrated. Press the Tempo Apps button
repeatedly to exit the calibration mode.
MAINTENANCE AND TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
