V1.0 PROCUT 30A Digi Plus Plasma Cutter 9085754
Visit www.princessauto.com for more information 3
INTRODUCTION
The plasma cutter is an inverter-based plasma cutting machine produced
using the latest in IGBT technology. This machine is reliable, robust and
stacked with features that you can expect from a quality plasma cutter.
The plasma cutter produces a high temperature plasma stream providing
effortless cutting mild steel, stainless steel and aluminum. The plasma
cutter is suitable for a wide range of applications including sheet metal
fabrication, light industrial use, site work, automotive, duct work, repair
and maintenance services.
The term welding in this manual includes both welding and plasma cutting.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the risk
of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A
notice is an alert that there is a possibility of property damage, injury or
death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that
will result in severe personal injury or death if the proper
precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may
result in minor or moderate injury if proper practices are not
taken.
NOTICE! This notice indicates that a specific hazard or unsafe practice
will result in equipment or property damage, but not
personal injury.
To Next Page
Loading...