Features:
• Locates cables quickly and easily
• Locates hidden cables
• Isolates the right cable or pair fast
• Overcome noise and save time
• Tone on live networks safely and effectively
• Verify conductor continuity with Cable Map
• Identify and troubleshoot cable services
Applications:
• Copper cabling media, including shielded (STP) and UTP cable
• 75 or 50 Ohm coaxial cable
• Two conductor control, security, generic cabling
• 10 Base-T or 10/100 Base-T datacom networks
• POTS telecom serviceAdvanced Features
Advanced Features
• MT-7068 Toner generates 1 KHz compatible legacy analog tones that analog audio Probe can detect.
• MT-7068 Toner provides two 1 KHz analog toning modes, one-note and two-note tones, for location and
isolating cables.
• MT-7068 Toner's multiple-level LEDs simplify signal interpretation in noisy environments.
• In locating mode, the Probe's LEDs light up from 1 to 8 as the signal strength increases. The higher the
number, the stronger the signal.
• MT-7068 Probe also beeps in different tones to indicate good wiring, miswires, shorts, and opens in an
efficient area between10 to 30 centimeters.
• The 1 KHz analog toning mode is available at all connectors on the MT-7068-T Toner.
• The MT-7068 feature also lets you use the Toner and Probe to validate and troubleshoot wiring on RJ11
/RJ45 cables and connectors, USB, F, BNC, and RCA connectors, and it also supplied with alligator
clips to work with.
• MT-7068 Toner detects telephone and Ethernet service, indicates polarity and active line numbers on
voice circuits, and indicates active pair number on Ethernet circuits.
• MT-7068 Toner and Probe also provide standard functions such as visual and audible signal strength
indication, digital toning/detection, analog toning/detection, and continuity testing.
• MT-7068 Toner features LED indicators for detecting the common
wire
resistance
(>300Ù)
for bad
connections.
• MT-7068 Toner identifies and diagnoses POTS with multi-line Telco detect polarity and ring indication
(Line 1 and Line 2).
• MT-7068 Toner detects telephone service and circuit polarity on its RJ11 and RJ45 jacks (Hand set and
Butt set).
• MT-7068 Toner identifies and diagnoses Ethernet link connectivity with NIC/hub indication.
• MT-7068 Probe equipped with composite tip to reduce the risk of getting shock.
• MT-7068 Toner and Probe equipped with easy tip replacement, and lanyards attachment point for
hands-free operation.
3
To Next Page
Loading...
