MT-7068-R Probe
I. Probe 2. USB adapter
3. F connector 4. Wrist strap
5. RJ-45(8Pin) / RJ-11(6/4/2pin) adapter 6. 02.5mm ear jack
7. Volume control 8. Battery cover
9. Indicates detection of MT-7068 signal and shows battery status at power-up
10. Multiple-level LED CABLE MAP, 1KHz analog tone signal indication
II. 5-level function switch
12.
Power OFF
13. 1 KHz legacy analog signals detecting with audio indicator from speaker.
14. 1 KHz legacy analog signals detecting with audio indicator from earphone.
15. Identifies signals like shorts, opens, and twisted pair cabling with audio and this LED visual
indicators.
(Refer to LED Cable Map)
16. Identifies signals like shorts, opens, and twisted pair cabling with this LED visual indicator.
(Refer to LED Cable Map)
Figure 2 MT-7068-R Probe Diagram
6
To Next Page
Loading...
