ProAudio PP107234 - Bluetooth Audio; Listen to Audio via Bluetooth; Random and Group Playback

Bluetooth — Audio
• Operations and display indications may differ according to their availability
on the connected device.
• Depending on the connected device, some features may not work with
your device.
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1
Press B SRC repeatedly to select BTAUDIO.
• Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause
Press 6 IW.
Select group or folder Press 2
/ 1 .
Reverse skip/Forward skip
Press S / T.
Reverse/Fast-forward
Press and hold S / T.
Repeat play Press 4
repeatedly.
[ALLREPEAT] , [FILEREPEAT] , [GROUP REPEAT] ,
[REPEATOFF]
Bluetooth®
To On the faceplate
Random play Press and hold 3 to select [ALLRANDOM]
or
[GROUP RANDOM] .
• Press 3 to select [RANDOMOFF].
Select a file from a folder/list Refer to “Select a file to play” on page 9.
Switch between connected
Bluetooth audio devices
Press 5.
(Pressing the “Play” key on the connected
device itself also causes switching of sound
output from the device.)
Listen to iPod/iPhone via Bluetooth
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPodBT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page7)
• If you plug in an iPod/iPhone to the USB input terminal while listening to
iPodBT source, the source automatically changes to iPodUSB source.
Press B SRC to select iPodBT source if the device is still connected via
Bluetooth.
ENGLISH
17