ProAudio PP107237 - Page 13

ENGLISH
13
Start listening
1
Press B SRC repeatedly to select SIRIUSXM.
2 Press BAND repeatedly to select a band.
3 Press .
“ ” indicator lights up.
4 Turn the volume knob to select a category, then press the knob.
If “ALL CHANNELS” is selected, all the available channels will be shown.
5 Turn the volume knob to select a channel, then press the knob.
(or)
Press S / T to search for a channel manually.
• Pressing and holding S / T changes the channel rapidly.
If a locked channel or a mature channel is selected, a pass code input
screen appears. Enter the pass code to receive the channel. (Page14)
Direct Access Tuning (using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a channel number.
3 Press ENT IW to search for the channel.
• To cancel, press
or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
SiriusXM® Radio
SiriusXM Keymode
Press and hold the volume knob to change the keymode (channel or
replay). (Default: Channel keymode)
“
” indicator lights up when replay keymode is selected.
When channel keymode is selected...
To On the faceplate On the remote control
Select a channel
Press S / T. Press S / T (+).
Change a channel
rapidly
Press and hold S /
T.
Press and hold S /
T (+).
Store a channel of
the current band
Press and hold one of the
number buttons (1 to 6).
( Not available )
Select a stored
channel of the
current band
Press one of the number
buttons (1 to 6).
Press one of the number
buttons (1 to 6).
When replay keymode is selected...
To On the faceplate On the remote control
Play back/pause
Press 6 IW. Press ENT IW.
Skip backward/
forward
Press S / T. Press S / T (+).
Rewind/Fast-forward
Press and hold S /
T.
Press and hold S /
T (+).
Go to Live Press 1. Press 1.
Be sure to exit replay keymode before tuning into a different channel.
• To exit replay keymode, press and hold the volume knob. (“
” indicator
goes off.)