Averaging Modes
The MCT 300 has a choice of three methods of ‘averaging’ the constituent readings, these are:
Damping: This is a time constant based ‘smoothing’ of the readings.
Real Time Averaging: This is a ‘pipeline’ average of the readings over a selected time.
Gated: This is an ‘event’ based average of the sensor readings. The event being a contact
closure at the sensors ‘hold’ input.
Moisture: 3.6% 01
Damp/RTA/Gate: 0
Selection of the 'averaging' mode
is made by using the relevant code
number
Mode Code
Damping 0
RTA 1
Gated 2
Press ENTER to save
52
To Next Page
