EasyManua.ls Logo

Procom MG10TBF - User Manual

Procom MG10TBF
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VENT-FREE GAS WALL
HEATER
OWNER’S OPERATION AND
INSTALLATION MANUAL
BLUE FLAME MODELS
MG10TBF, MG20TBF, MG30TBF
MG20TBF-BB, MG30TBF-BB
WARNING: If the information in this manual is not
followed exactly, a re or explosion may result causing
property damage, personal injury or loss of life.
Do not store or use gasoline or other ammable va-
pors and liquids in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any
phone in your building.
Immediately call your gas supplier from a neighbors
phone. Follow the gas suppliers instructions.
If you cannot reach your gas supplier, call the re
department.
Installation and service must be performed by a quali-
ed installer, service agency or the gas supplier.
WARNING: This appliance is equipped for Natural and
Propane gas. Field conversion is not permitted other than
between natural or propane gases.
MG30TBF
Shown
Questions, problems, missing parts? Before returning to your retailer, call
our customer service department at 1-866-573-0674, 7:30 am - 4:15 pm CST,
Monday through Friday or email customerservice@usaprocom.com

Questions and Answers

  • S
    samantha27Sep 12, 2025
    Why does my Procom Heater make a clicking noise?
    • T
      Tracy HallSep 12, 2025
      The clicking or ticking noise your Procom Heater makes just after the burner is lit or shut off is typically due to metal expanding while heating or contracting while cooling. If the noise is excessive, contact a qualified service technician.
  • S
    Shawn LewisSep 13, 2025
    Why is there white powder around my Procom Heater?
    • T
      Timothy DorseySep 13, 2025
      The white powder residue forming within the burner box or on nearby surfaces when using your Procom Heater is likely due to vapors from furniture polish, wax, carpet cleaners, etc., turning into residue when heated. Turn off the heater when using these products.
  • P
    potterkatherineSep 15, 2025
    Why does my new Procom Heater smoke?
    • D
      davidpinedaSep 15, 2025
      The slight smoke or odor during the initial operation of your Procom Heater is due to residues from the manufacturing process. This problem should stop after a few hours of operation.

Procom MG10TBF Specifications

General IconGeneral
BrandProcom
ModelMG10TBF
CategoryHeater
LanguageEnglish

Related product manuals