Profitec PRO 300 - Proper Use; Machine Description; Machine Parts; Technical Data

ENGLISH
Translation of the original German user manual 19
2.2 Proper use
The PRO 300 is designed to be used for the preparation of coffee, hot water and steam only. The machine
is not intended for commercial use.
Use of the machine other than for the above-mentioned purpose will void the guarantee . The
manufacturer cannot be held responsible for damages due to unsuitable use of the machine and is not
liable for recourse.
This appliance is intended to be used in households and similar applications such as:
• staff kitchen areas in shops, offices and other working environments
• workshops
• by clients in hotels, motels and other residential type environments
• bed and breakfast type environments
3 MACHINE DESCRIPTION
3.1 Machine parts
PRO 300
1. On/off switch steam
2. On/off switch machine/coffee boiler
3. PID-Display
4. Steam wand
5. Brew group
6. Steam knob
7. Signal lamp steam boiler - orange
8. Signal lamp on/off machine - green
9. Cup warming tray
10. Water tank lid
11. Signal lamp coffee boiler
12. Coffee switch
13. Hot water knob
14. Hot water wand
15. Portafilter
16. Boiler pressure gauge
17. Drip tray
Caution!
Danger of injury: The following parts are hot or may become hot:
• area around the steam and hot water handle
• steam and hot water wands
• portafilter
• brew group
• body (front, upper part and side frames)
3.2 Technical data
Voltages: EU: 230 V
UK: 230 V
Australia: 240 V
New Zealand: 240 V
US: 115 V
Japan: 100 V
Power: 1600 W
Water tank: ca. 2.8 l
Measurements: W x D x H / 255 mm x 415 mm x 385 mm
Measurements with portafilter: W x D x H / 255 mm x 475 mm x 385 mm
Weight: 18 kg
7
6
5
8
4
3
2
1
14
13
12
11
16
15
17
9
10