To Next PageTo Next PageWhy is there little or no crema on my Profitec PRO300 Coffee Maker coffee?
If your Profitec Coffee Maker produces coffee with little or no crema, several factors could be at play. The coffee grind might not be fine enough, in which case you should use a finer grind and tamp the ground coffee more firmly. Reducing the brewing pressure may also help. Alternatively, the coffee itself might be too old; using fresh coffee is recommended.
What to do if Profitec PRO300 produces coffee with little or no crema?
If your Profitec Coffee Maker produces coffee with little or no crema, make sure you are using the right amount of coffee, approximately 7-9 grams for each cup. Additionally, a dirty shower screen can cause this issue; cleaning the brew group might resolve the problem.
Step-by-step guide for the initial setup and operation of the PRO300 machine.
Detailed steps for preparing espresso, including grinding, tamping, and brewing.
Instructions for using the steam function to froth milk or heat beverages.
Detailed steps and tips for achieving professional milk frothing results.
Procedure for cleaning and degreasing the brew group using a special cleaner.
Instructions for performing preventative descaling to avoid damage from lime residues.
General| Type | Espresso Machine |
|---|---|
| Boiler Type | Dual Boiler |
| Material | Stainless Steel |
| Boiler Material | Stainless Steel |
| PID Controller | Yes |
| Portafilter Size | 58 mm |
| Steam Wand | Yes |
| Hot Water Dispenser | Yes |
| Pre-Infusion | Yes |
