To Next PageTo Next Page
Need help?Do you have a question about the ProForm 710 Ekg Exercise Bike and is the answer not in the manual?
General| Resistance Type | Magnetic |
|---|---|
| Resistance Levels | 16 |
| Display Type | LCD |
| Heart Rate Monitoring | Yes |
| Programs | 12 |
| Weight Capacity | 250 lbs |
| Type | Upright |
Attach the front stabilizer to the frame using specified screws and washers.
Secure the rear stabilizer to the frame using specified screws and washers.
Connect wire harnesses and attach the upright to the frame with screws.
Insert four "AA" batteries into the console, ensuring correct orientation.
Connect the console wire harness and secure the console to the upright.
Mount the water bottle holder to the upright using screws.
Attach the handlebar to the upright using the clamp and adjustment handle.
Insert and secure the seat post into the frame using the adjustment knob and screw.
Attach the seat to the seat carriage and position the carriage on the seat post.
Firmly tighten pedals and adjust pedal straps for secure foot placement.
Guide to adjusting the seat post height for proper pedaling posture.
