S
Scott ThompsonAug 11, 2025
How to turn on ProForm FTL59106.0 Treadmill?
- AAngela RamirezAug 11, 2025
First, ensure the power cord is properly plugged into a surge suppressor, and the surge suppressor is connected to a grounded outlet. Note that the treadmill isn't compatible with GFCI outlets. Also, make sure the key is inserted into the console after plugging in the power cord. Finally, check the reset/off circuit breaker on the treadmill frame near the power cord. If the switch protrudes, wait five minutes, then press it back in to reset.