ProForm GR 80 PFEX1995.1 - Page 8

8
7
16
13
36
Console
Wire
Harness
52
7. Connect the console wire harness to the Upper
Wire Harness (36). Insert the console wire harness
into the Upright (13). Attach the Console (16) to the
Upright with four M4 x 16mm Round Head Screws
(52).
13
36
8
8. Connect the Upper Wire Harness (36) to the Lower
Wire Harness (8). Attach the Upright (13) to the
Frame (1) with three M8 x 25mm Button Screws
(33) and three M8 Split Washers (59). Be careful
to avoid pinching the Wire Harnesses.
8
33
33
33
59
59
1