13
HOW TO ADJUST THE STRIDE OF THE
ELLIPTICAL EXERCISER
To adjust the stride of the elliptical exerciser, first pull
one of the adjustment knobs until the adjustment
bracket pivots freely. Pivot the adjustment bracket
until the adjustment knob is aligned with one of the
two holes in the crank arm, and gently release the
knob. Then, pivot the adjustment bracket back and
forth slightly to make sure that the adjustment pin is
engaged in one of the holes in the crank arm.
Adjust the other side of the elliptical exerciser in the
same way.
Adjustment
Bracket
Adjustment
Knob
Crank
Arm
Holes
Adjustment
Pin
To Next Page
Loading...
