HOW TO ADJUST THE STRIDE OF THE
ELLIPTICAL EXERCISER
To adjust the stride of the elliptical exerciser, first pull
one of the adjustment knobs until the adjustment
bracket pivots freely. Pivot the adjustment bracket
until the adjustment knob is aligned with one of the
holes in the crank arm, and gently release the knob.
Then, pivot the adjustment bracket back and forth
slightly to make sure that the adjustment pin is
engaged in one of the holes in the crank arm.
Adjust the other side of the elliptical exerciser in the
same way.
Crank
Arm
\
Holes
Adjustment
Pin
Adjustment
Bracket
Adjustment
Knob
13
To Next Page
Loading...
Need help?
General
