ProLights EclProfile CT+ - 11 Error Messages

Group Message Type Comment
Cong "Not Calibrated" Error
Temperature sensor "Temp. Sensor failed" Warning checksum error ROM code
"T: Can't read ROM code" Error
"T: Can't get input" Error
"T: Can't read status" Error
Temperature management "Overtemperature" Error
"LED Temperature" Error cannot read LED tempera-
ture
Transfer cong "DMX active" Error cannot transfer with active
DMX
Flash memory "Initializing Flash" Information
"Invalid ash entry" Warning
"Can't unlock ash (WR)" Error
"Can't unlock ash (ER)" Error
"Can't lock ash" Error
"Can't load Pg1" Error
"Can't load Pg2" Error
"Can't load ash" Error
11 - ERROR MESSAGES
PROLIGHTS - EclProfile CT+
17