ProLights SMARTBAT - Automatic Show Programs; Show Speed Adjustment; Custom Static Color Settings

SMARTbAT
10
3.5 AUTO SHOW
This xture has a built-in automatic program. To access this, please see the below instructions:
• Press the button MENU so many times until shows [P--].
• Press the button ENTER to conrm.
• Using UP/DOWN button, select one of the programs [P1 - P4].
• Press the button ENTER save the setting.
3.6 SHOW SPEED
To set the show speed refer to the following steps:
• Press the button MENU so many times until shows [S--].
• Using UP/DOWN button, select one of the programs [S1 - S100].
• Press the button ENTER save the setting.
3.7 STATIC COLOR
This xture has the ability to accept custom static color settings. Access these chases via the control panel
on the back of the xture.
• Press the button MENU so many times until shows [C--].
• Press the button ENTER to conrm.
• Using UP/DOWN button, select one of the programs [C1 - C15].
• Press the button ENTER save the setting.
g255
b0
~
b255
wo
~
w255
10 dIM OFF
dim1
dIM2
dIM3
11 SET ON
OFF
12 S-tr drAS drAU
drCH dr 1
~
dr16
dtAS dtAU
dtCH dt 1
~
dt16