55
OFF
4. Place an empty (do not add coee) double shot lter into the lter holder.
5. Insert and lock the lter holder into the appliance following the detailed
instructions in the chapter: Brewing Espresso.
6. Place a container under the 2-spout brew head.
7. Plug in the appliance.
8. Press the ON/OFF button .
• The indicator light on this button will ash.
• For the rst use, the water may not come out.
You may turn the steam knob anticlockwise to the maximum position.
When the indicator light on the ON/OFF button stops ashing,
press the manual button .
When the steam tube dispenses water, press again to
stop dispensing water.
Turn the steam knob clockwise to the OFF position.
9. Wait for the indicator light on the ON/OFF button stops ashing, and then
press .
• The water will begin to ow into the container.
10. When the container is full, press to stop the ow of water to the container.
11. Empty the container and the water collected in the drip tray.
12. Repeat this process to brew 2 or 3 containers of water.
• You are now ready to brew espresso.
EXP1050 IB 2022.indd 55 28/2/2022 9:09 AM