54
Carefully unpack the appliance and remove all packaging materials.
Before using your espresso maker for the rst time, clean all removable parts in
warm soapy water , and rinse well before replacing.
Before brewing your rst cup of espresso, please clean your espresso maker as
follows:
1. Place the appliance on dry, at and heat-resistant surface.
2. Fill the water tank with fresh cold water to the MAX level line.
3. Replace the water tank to its original position. Close the water tank cover.
Press the
handle to make
sure the water
tank is in place.
IMPORTANT: It is normal that there may
be some water in the area under the water
tank. Please regularly dry this area using a
clean sponge.
BEFORE USING FOR THE FIRST TIME
OK
You can open the water tank cover and
pour water into the tank.
Open the water tank cover. Grasp the water
tank handle and lift the water tank out of the
appliance.
Fill the water tank up to the MAX level line.
EXP1050 IB 2022.indd 54 28/2/2022 9:09 AM
To Next Page
Loading...
