69
Milk is not foamy
after frothing or
it is not coming
out of the steam
tube.
Steam tube is blocked.
Clean the steam tube using
a clip and descale the steam
tube following the DESCALING
instructions.
No water comes
out from the
pump.
Water tank is not securely in place. Press down rmly on the tank.
There is air in the steam tube.
When the pump is working, turn
the steam knob anticlockwise
to dispense appropriate amount
of water.
Please contact the customer service for any problems not covered in the above
table or when the suggested solutions do not solve the problem.
Ratings: 220-240V~, 50-60Hz
1050W
SPECIFICATIONS
EXP1050 IB 2022.indd 69 28/2/2022 9:09 AM