62
16. Pour the milk into the cups with espresso and then spoon the thick foam
on top.
NOTE:
• To prepare more than one cappuccino, rst prepare all the necessary cups of
espresso, then steam the milk for all the cappuccinos together.
• Before continue using the steam function, allow the appliance to cool for at
least 10 minutes and then follow the steps below:
1. Wait for the ON/OFF indicator light to stop ashing and then press the
manual button .
2. Turn the steam knob anticlockwise towards the maximum position.
3. Wait for the steam tube to dispense water and then press to stop
dispensing water.
4. Wait for the ON/OFF indicator light to stop ashing and then press the
steam button . The appliance is ready to use steam function.
What to do if you want to brew Espresso after frothing milk ?
Please follow the steps below otherwise the coee dispensed will taste burnt.
a. Place a container underneath the brew head without the lter holder in
place.
b. Wait for the ON/OFF indicator light to stop ashing and then press the
manual button .
c. Let hot water come out of the brew head until the ON/OFF indicator light
start ashing.
d. Then you can follow the Brewing Espresso instructions.
Sprinkle cocoa powder or cinnamon as
desired.
Enjoy your Cappuccino !
EXP1050 IB 2022.indd 62 28/2/2022 9:09 AM
To Next Page
Loading...
Need help?
General
