PROLiNK
®
PWH2004 User Manual www.prolink2u.com
Revision 1.0 (Aug’09) 46
5.2.5.3 Accessing AOL
To access AOL (America On Line) through the Wireless Router, the AOL for Windows
software must be configured to use TCP/IP network access, rather than a dial-up
connection. The configuration process is as follows:
a. Start the AOL for Windows communication software. Ensure that it is Version 2.5, 3.0
or later. This procedure will not work with earlier versions.
b. Click the Setup button.
c. Select Create Location, and change the location name from "New Locality" to "Wireless
Router".
d. Click Edit Location. Select TCP/IP for the Network field. (Leave the Phone Number
blank.)
e. Click Save, then OK.
f. Configuration is now complete.
g. Before clicking "Sign On", always ensure that you are using the “Wireless Router”
location.
5.3 Macintosh Clients
From your Macintosh, you can access the Internet via the Wireless Router. The procedure is as follows.
a. Open the TCP/IP Control Panel.
b. Select Ethernet from the Connect via pop-up menu.
c. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left
blank.
d. Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the required changes are:
• Set the Router Address field to the Wireless Router’s IP Address.
• Ensure your DNS settings are correct.
To Next Page
Loading...
