PRC2402M User Manual v1.1
Page 4 / 49
Getting Started
To setup PRC2402M you need to ensure the following item in the list is available.
• Internet Access (DSL, Modem or existing Wireless Router).
• Ethernet Cable with RJ45 connector at both ends.
• Computer equips with Ethernet Network adapter (10Base-T or 100Base-TX or
1000Base-TX) with capability IEEE802.11a/b/g/n/ac.
• Web Browser such as (Microsoft Edge, Chrome, Firefox, or Safari)
Wi-Fi Mesh Placement Guide
• A solid Blue LED lighting indicates that the Mesh is performing at its optimal strength
• Avoid placement of Mesh Node units with high potential of signal obstruction
(e.g. walls, doors, aquariums) or any of Bluetooth/Devices with high wireless
transmission (e.g microwave) within a 30cm radius.
• Ensure that each mesh unit is spread out evenly
• For multi-storey homes, position mesh router units in open space or elevated positions
such as shelfs or table tops.
To Next Page
Loading...
Need help?
General
